Loader Parts Source, Inc. offers this Hydraulic Drive Motor to Replace Mustang OEM 250-32292, 250-31014, and 250-32358.
This motor has #12 O-ring boss ports for the drive hoses and a #6 O-ring boss case drain hole.
It also has a 3/8-16 bolt hole in the end of the shaft to hold the sprocket in place.
If your motor has a case drain line, this is the one you need.
If you only have the two main hoses and no case drain line, you must use LPS250-32335-M.
Since drive motors are installed new by the OEM in pairs. Loader Parts Source, Inc. always recommends changing both drive motors as they have been exposed to the same wear and tear. This could save future down time and expense.
Loader Parts Source always strives to be fast, easy, and fair. In order to help us achieve our goal, we offer a full 12 month warranty on all of our parts to ensure that our part has the same reliability as the original. Check out our Warranty Policy by clicking here.
If you are not satisfied with our product, please give us the chance to make it right! Please contact us by clicking this link or call our Customer Service Representatives toll free at (866) 573-3659.
